Bringing into use / Cleaning and care / Disposal
pressure of 2.5 bar. You can check the
operating pressure using the pressure
gauge
(see "Building up the operat-
4
ing pressure").
Pull the safety valve
as it will go to release the residual pres-
sure in the container
©
Cleaning and care
Note: Clean the pressure sprayer after
each use!
©
Clean the pressure
sprayer
Unscrew the spray nozzle
Clean the spray nozzle
water.
If the spray nozzle
clean it by pushing a needle through it.
Flush through the pressure sprayer,
pipes and tubes with water.
Clean the surfaces of the product with
a moist cloth.
©
Clean the suction hose
Clean the suction hose
Loosen the union nut of the suction hose
on the container
13
Pull the suction hose
tank
.
5
Clean the suction hose
water.
After cleaning, insert the suction hose
back in its opening on the tank
18
Tighten the union nut
12 GB/IE
upwards as far
3
.
5
.
11
under running
11
is clogged,
11
as follows:
18
.
5
out of the
18
under running
18
.
5
hand-tight.
13
©
Store the pressure
sprayer
Clean the pressure sprayer before storing
it away.
Remove any leftover spray product from
the tank and the pipes.
Store the pressure sprayer in a dry,
dust-free place.
©
Disposal
The packaging is made entirely
of recyclable materials, which
you may dispose of at local
recycling facilities.
Contact your local refuse disposal authority
for more details of how to dispose of your
worn-out product.
Product Information:
Pressure Sprayer
Model no.:
Z30597
Version:
11 / 201Y
®