Technical Specifications - HQ Power VDP1500SM3 Bedienungsanleitung

There are no user-serviceable parts inside. Refer to an authorized dealer for service and/or spare
parts.
9. Troubleshooting
Problem
The smoke machine does not
work when switched on [1].
There is no smoke output when
the green [11] or red [10]
switch is pressed.
The nozzle keeps emitting smoke
even after releasing the green
[11] or red [10] switch.
Remember to contact your HQPower™ service agent in case problems persist.
10.

Technical Specifications

power supply
power consumption
fuse
warm-up time
smoke output
tank capacity
dimensions
weight
optional
recommended smoke liquid
recommended cleaning liquid
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our
website www.hqpower.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 02 – 18/04/2013
VDP1500SM3
Possible solution
Check if the power cord is correctly inserted into the mains.
Check the fuse [2] and replace if necessary.
Check if the remote control connector is correctly inserted into the
connection [4].
The smoke machine has not warmed up yet. Wait until the green
LED [11] lights.
Regularly check the liquid level inside the tank and refill if
necessary.
Residue may have clogged up the output nozzle. Clean the nozzle
by gently poking the inside with a needle.
Occasionally, a little smoke escapes from the nozzle after a smoke
burst. This is absolutely normal.
Immediately switch off the smoke machine and disconnect from
the mains if the smoke burst does not stop after releasing the
green [11] or red [10] switch.
230 VAC / 50 Hz
1500 W
F10A/250V, 5 x 20 mm (order code FF10N)
8 minutes
± 566 m³/min (20 000 ft³/min)
3 L
510 x 320 x 220 mm
9 kg
High-Density smoke liquid (order code VDLSLH5, 5 litres)
Pro High-Density smoke liquid (order code VDLSLHT5, 5 litres)
order code VDLCL (0.25 litres)
6 ©Velleman nv