Disposal / Recycling; Technical Data - HSM Pure 220 Betriebsanleitung

9 Disposal / Recycling

Electrical and electronic old
devices contain a variety of valu-
able materials, but also hazardous
substances which were required
for function and safety. Incorrect
disposal or handling can be dan-
gerous to your health and the environment.

10 Technical data

Cutting type
Cut size (mm)
Security level DIN 66399
Cutting capacity* (sheets), A4
Weight
Intake width
Cutting speed
Power supply
Power consumption
with max. number of sheets
Operating mode**
Operating time**
Idle time**
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL)
Size W x D x H (mm)
Shredded material container volume
Sound pressure level emissions
(Idle running / load)
* The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The
performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage
or a different mains frequency to the one specifi ed could result in less sheet capacity and increased noise during oper-
ation. The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
** Only US-version: Continuous operation
This document shredder meets the applicable harmonisation legislation of the European Union:
• Low Voltage directive 2006/95/EU
• EMC directive 2004/108/EU
• RoHS directive 2011/65/EU
The EU declaration of conformity can be requested from the manufacturer.
12
Never dispose of old devices in the house-
hold waste. Observe the current applicable
regulations and use the collection points for
returning and recycling electric and elec-
tronic devices. Dispose of all the packaging
materials also in an environmentally-respon-
sible way.
Strip cut
5.8
P-2, T-2, E-2
70 g/m 15 - 17
2
80 g/m 13 - 15
2
4 kg
HSM Pure 220
english
3.9
P-2, T-2, E-2 P-4, T-4, E-3, F-1
12 - 14
11 - 13
225 mm
44 mm/s
215 - 240 V, 50 - 60 Hz
110 - 130 V, 50 - 60 Hz
300 W
Brief operation
3 min
60 min
-10 °C to +25 °C
max. 90 %, without condensation
max. 2,000 m
365 x 257 x 466
20 l
58-60 dB(A) / 63-64 dB (A)
Cross cut
4 x 25
7 - 8
6 - 7
4.5 kg
05/2015