Battery Capacity Indicator; Record Mode - Niceboy Q5 Bedienungsanleitung

BATTERY CAPACITY INDICATOR:

Battery charged
CHARGING:
Connect the car adapter to the microUSB slot in your camera to let the camera being charged.
1.
Charging via USB: Connect the device to PC / laptop, using USB cable. The device will
2.
start being charged.
HOW TO INSERT/REMOVE A MICRO SD CARD:
Beware of the direction in which you insert the micro SD card to its slot; the device and
1.
the card may suffer damage by doing so opposite,.
Once the micro SD card is inserted in the unit, the card will be set just for this device.
2.
Initial information may get lost.
Notes: Use a high-speed micro SD card, formatting it beforehand

RECORD MODE:

Activate recording with the REC. The recording can be ended with the same button; video
record is then stored.
SETTING THE REC MODE:
Resolution : 1080FHD 1920x1080, 720P 1280x720, WVGA 848x480, VGA 640x480
1.
Video loop: On/3 minutes/5 minutes/10 minutes
2.
HDR (High Dynamic Range): Off, On
3.
Exposure: +2.0, +5/3, +4/3, +1.0, +2/3, +1/3, +0.0, -1/3, -2/3, -1.0, -4/3, -5/3, -2.0
4.
Audio record: Off, On
5.
Dating: Off, On
6.
G-SENSOR: Off, Low, Medium, High
7.
Radar detection: Off, On
8.
GPS: Off, On (GPS module is not included)
9.
Driver name: Off, On
10.
Battery partly charged Battery low
EN
Battery empty
14