GUTMANN Solo Bedienungsanleitung Seite 21

Exchange of the lighting
Please cut the connection between the
extractor hood and the power supply
system!
The lighting remains hot for some time.
Please wait therefore for some time till the
lighting has cooled off.
For the exchange of the lighting at first
please take the retaining ring (c) out of the
extractor hood with a screwdriver.
Afterwards solve the plug of the light bulb
(a) and separate it from the fixture. Therefore
the feather ring (b) must be crushed and
be removed upwards. The installation of
the new lighting is made in reverse order.
Dysfunctions
Please refer to our customer service if
-
-
-
Please indicate your type of extractor hood
and the serial number. These informations
are mentioned on the type sheet which is
situated inside the hood on the filter.
a
b
c
the extractor hood produces too
much undefined noise and the
control of the exhaust air path reveils
no faults;
the supercharger works faulty;
the circuit operates invalid.
en