Carbon Filters; Changing The Lamps - KKT KOLBE LIBERA Benutzerhandbuch

Care and cleaning
• Due to possible fatty deposits on
dishes or the accumulation of food
particles in the mesh, the metal grea-
se filters should be cleaned separately
from dishes and glasses. Highly added
metal grease filters should first be
soaked well in hot rinse water.
• Allow the filter to dry thoroughly and
carefully replace it in the extractor
hood.
• Frequent cleaning or the use of ag-
gressive cleaning agents can cause
color changes of the metal surface.
These have no influence on the filter
function and are not a reason for
complaint.
!
Avoid using alkaline dishwasher
cleaning agents (ph value over 7).

4.2 Carbon filters

Traditional carbon filters (normally round
in shape) can be neither washer nor re-
generated. In normal use and depending
on their size, replace every 4 to 6 months.
Comply with the relevant instructions on
the package.
Original Carbon filter
for this model: K606
5. hanging the lamps
!
When changing a lamp, make sure that
the new lamp does not have a higher
wattage than of the original.
Disconne ct the powe r supply be fore
changing the lamps. The lamp can be
changed directly.
31