Multi-Touch Chassis Display Dimensions; Attaching The Side Brackets; Connecting The Display - 3M C2167PW Bedienungsanleitung

6

Multi-Touch Chassis Display Dimensions

C2167PW

Attaching the Side Brackets

Depending on your mounting scheme, you may use the side brackets to mount your
displays onto your wall or device. Find a suitable location for attaching side brackets.
Note: You will need a screwdriver to attach the side brackets. Your touch monitor
includes four side brackets (and eight screws, M4x8). This equipment is intended to be
mounted in accordance with the proper hardware and the installation instructions
supplied with the product. Use of mounting brackets or screws other than those specified
in the installation instructions may cause a hazard.
Top and bottom brackets

Connecting the Display

To setup this display, please refer to the following figures and procedures.
3M Touch Systems, Inc. Proprietary Information –
3M™ Multi-Touch Display User Guide
Left and right side brackets
TSD-44310 REV C