Setting Up Your Multi-Touch Chassis Display; Unpacking Your Touch Display - 3M C2167PW Bedienungsanleitung

5
Chapter 1

Setting Up Your Multi-Touch Chassis Display

This chapter describes how to set up your 3M Touch Systems Multi-Touch Chassis
Display. You need to complete the following tasks:

Unpack the components

Connect the video cable, touch display USB cables, and power cable

Power on the display and test your setup

If you are not running Windows® 7 (or Tablet PC), install software from the
enclosed CD.

Unpacking Your Touch Display

Carefully unpack the carton and inspect the contents:

USB communication cable

VGA video cables

DVI video cables

Power cable and DC power supply

Touch documentation and driver CD

Hardware kit -- 4 mounting brackets and (8) M4x8 screws
USB cable
VGA cable
Quick Start Guide
3M Touch Systems, Inc. Proprietary Information –
Power cable
DC power supply
DVI cable
Side brackets
Touch Driver CD
3M™ Multi-Touch Display User Guide
Remote key
(sold separately)
8 (M4X8) Screws
TSD-44310 REV C