DETEWE M100-AT4 Installationsanleitung Seite 8

Installation of the M100-AT4 Interface Card
3. Carefully insert the interface card
in slot no. 3. The component side
must face to the right. Ensure that
the card is fitted securely. Do not
insert the card in slot 1 or 2.
4. Close the housing cover. Switch on
the OpenCom 130.
M100-AT4 Interface Card
8
Type (name) of
the interface card
Pin outs
The following illustration shows
the pin assignment of the M100-AT4
Interface Card a/b ports.
Slot 3
ab 3/1 ab 3/2
ab 3/3 ab 3/4
Connection of an interface card to
pressure terminals
Installation Guide