DETEWE M100-AT4 Installationsanleitung Seite 11

dialogue opens. Previously as-
signed telephone numbers are
displayed in a list. The list also dis-
plays the telephone numbers of
the a/b ports you have configured.
19. Click on the access number you
wish to assign internal telephone
numbers to.
The PBX Configuration - Call
Distribution -Incoming -
<MSN> - <Time group> -
Change dialogue opens.
20. Enter up to ten internal telephone
numbers to which incoming exter-
nal calls are to be signalled.
21. Confirm with Apply.
22. Repeat steps 19 to 21 until all tele-
phone numbers have been as-
signed to internal telephone num-
bers.
Installation Guide M100-AT4 Interface Card
11