Hilti TE 16 Bedienungsanleitung Seite 20

Drilling speed without
hammering, position 2
Drilling speed without
hammering, position 1
Hammer drilling speed
Single impact energy
Chuck
en
Drilling dia. range in concrete/
masonry (hammer drilling)
Percussion core bits
Drilling dia. range with drill
bits for wood
Drilling dia. range with drill
bits for metal
Drilling dia. range in
medium-hard concrete
Double insulated
(in accordance with EN 60745)
Mechanical slip clutch
Vibration absorbing grip
and side handle
Interference immunity
Radio and television
interference suppression
-NOTE-
The vibration emission level given in this information sheet has been measured in accordance with a standardised
test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assess-
ment of exposure. The declared vibration emission level represents the main applications of the tool. However if
the tool is used for different applications, with different accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure level over the total working period. An estimation of the
level of exposure to vibration should also take into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce the exposure level over the total working
period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain
the tool and the accessories, keep the hands warm, organisation of work patterns.
Noise and vibration information
(measured in accordance with EN 60745):
Typical A-weighted sound power level (LwA):
Typical A-weighted sound power level (LpA):
For the given sound power level as per EN 60745, the tolerance is 3 dB.
Wear ear protection!
Triaxial vibration value (vibration vector sum)
measured in accordance with EN 60745-2-1 prAA: 2005
Drilling in metal,, (a
measured in accordance with EN 60745-2-6 prAB: 2005
Hammer drilling in concrete, (a
Chiselling, (a
h, Cheq
Uncertainty (K) for triaxial vibration value
Right of technical changes reserved!
16
Printed: 07.07.2013 | Doc-Nr: PUB / 5070798 / 000 / 00
750 r.p.m.
750 r.p.m.
3.2 J
)
h, D
)
h, HD
):
750 r.p.m.
750 r.p.m.
3.2 J
TE-C (SDS plus)/TE -T (SDS top)
5–28mm dia.
66–90 mm dia.
5–20 mm dia.
max. 13 mm dia.
16 mm dia./72 cm 3 /min
Protection class II Z
in accordance with EN 55014-2
in accordance with EN 55014-1
TE 16
100 dB (A) 100 dB (A) 100 dB (A)
89 dB (A)
3.0 m/s
16.5 m/s
1.5 m/s
1100 r.p.m.
750 r.p.m.
750 r.p.m.
3.2 J
TE 16-C TE 16-M
89 dB (A) 89 dB (A)
2 3.0 m/s 2 6.0 m/s
2 16.5 m/s 2 16.5 m/s
11.5 m/s 2 11.5 m/s
2 1.5 m/s 2 1.5 m/s
2
2
2
2