Good Laboratory Practice
Data Storage in the internal memory
1. Select the desired range by pressing MODE.
2. Press CAL, select GLP and press CAL to display a complete calibration report.
Storing data
(C1020 only)
1. Press ê to store the displayed value in memory. The display shows a next
storage address.
1. Select the desired address and press CAL to enter the measured value in
memory.
Recalling data
(C1020 only)
1. Press é to recall the stored data. The display shows a list of stored values.
2. Select the desired address to read the stored values.
3. Press MODE to return to the normal measurements.
5