Running The Train For The First Time - Märklin 29214 Bedienungsanleitung

6.2 Connection for the Controller
Plug the switched mode switched power pack into
the controller
B 0
Plug the switched mode switched power pack into
the wall outlet
B 0
6.3 Overload Protection
A built-in overload protection protects the
switched mode switched power pack from dam-
age in the event of an overload or a short circuit.
The switched mode switched power pack turns
itself off and waits until the problem has been cor-
rected. Do not try to run any locomotive or control
any turnout as long as the problem is still present.
10

7. Running the Train for the First Time

Set the locomotive address on the controller and
run the locomotive
Switch
1
2
3
4
Stop
Operating the locomotive
Reversing direction
Turn the knob once past the 0 setting
Locomotive Address
78
72
60
24
Turning head-
lights on/off
(Not included
in delivery
scope).