Rutland 914i Windcharger
Other Items
What You Will Need - Tools
Suitable wire stripper
Small terminal screwdriver
Large flat blade screwdriver
Crosshead screwdriver
10mm Spanner or Socket
Other Items You May Have Selected
HRSi or HRDi Charge Regulator
Cable (usually 2.5mm² twin core - Part No: 902-015)
Rutland 914i Marine Mounting Kit and Stays Kit ( CA-12/02 & CA-12/32 )
Rutland 914i Land Tower & Rigging Kit (Part Nos: CA-12/08 & CA-12/07)
Short section of stainless steel tube to adapt into your own mounting design.
Voltmeter & Ammeter
Exploded View of The Rutland 914i
Doc No:SM-137 Iss. C 13.02.13
Six Blades with
Twenty Four
Nose Cone
With Three
Screws
Generator Hub
Other Items You Will Need
Mounting pole
Cable
Batteries
Battery terminals
Connector blocks (as determined
by your total system)
Nacelle Dome
7
Installation & Operation
Tail fin
Post Adaptor
Marlec Eng Co Ltd