Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Determining the quality of the fluid
Remove the cover on the
brake fluid reservoir. Pull
off the cap on the Easy Dot
and press the button to
turn it on. Select the
proper type of brake fluid
by pressing the button
several times. Press until
the white LED is illumi-
nated next to the required
DOT type:
Upper white LED: DOT 4
Lower white LED: DOT 3
Upper and lower LED: DOT
5.1
Submerge the test probe
completely but max 1,5 cm
in the brake fluid. You can
immediately read the re-
sult on the LED display.
24
Werbung
Inhaltsverzeichnis
