Additional Information; Specifications - Sony Bravia KLV-S40A10E Bedienungsanleitung

Additional Information

Specifications

Display Unit
Power Requirements:
220–240 V AC, 50 Hz
Screen Size:
KLV-S40A10E: 40 inches
KLV-S32A10E: 32 inches
KLV-S26A10E: 26 inches
KLV-S23A10E: 23 inches
KLV-S19A10E: 19 inches
Display Resolution (dots x lines):
KLV-S40A10E: 1366 dots x
KLV-S26A10E: 1366 dots x
KLV-S23A10E: 1366 dots x
KLV-S19A10E: 1280 dots x
Power Consumption:
KLV-S40A10E: 226 W
KLV-S32A10E: 119 W
KLV-S26A10E: 81 W
KLV-S23A10E: 71 W
KLV-S19A10E: 56 W
Standby Power Consumption:
KLV-S40A10E: 0,8 W
KLV-S32A10E: 0,5 W
KLV-S26A10E: 0,5 W
KLV-S23A10E: 0,5 W
KLV-S19A10E: 1 W
Dimensions (w × h × d):
KLV-S40A10E:
Approx. 999 x 740 x 370 mm (with stand)
Approx. 999 x 693 x 103 mm (without stand)
KLV-S32A10E:
Approx. 792 x 608 x 309 mm (with stand)
Approx. 792 x 564 x 99 mm (without stand)
KLV-S26A10E:
Approx. 658 x 517 x 309 mm (with stand)
Approx. 658 x 474 x 90 mm (without stand)
KLV-S23A10E:
Approx. 566 x 448 x 218 mm (with stand)
Approx. 566 x 411 x 89 mm (without stand)
KLV-S19A10E:
Approx. 468 x 402 x 218 mm (with stand)
Approx. 468 x 364 x 84 mm (without stand)
Weight:
KLV-S40A10E:
Approx. 33 kg (with stand)
Approx. 26,5 kg (without stand)
KLV-S32A10E:
Approx. 20 kg (with stand)
Approx. 16 kg (without stand)
KLV-S26A10E:
Approx. 16,5 kg (with stand)
Approx. 12,5 kg (without stand)
KLV-S23A10E:
Approx. 13 kg (with stand)
Approx. 9,5 kg (without stand)
KLV-S19A10E:
Approx. 10,5 kg (with stand)
Approx. 7 kg (without stand)
34
GB
lines
lines
lines
lines
Panel System
LCD (Liquid Crystal Display) Panel
TV System
Depending on your country/region selection.
B/G/H, D/K, L, I.
Colour System
PAL, SECAM
NTSC 3.58, 4.43 (only Video In)
Aerial
75 ohm external terminal for VHF/UHF
Channel Coverage
VHF: E2–E12
UHF: E21–E69
CATV: S1–S20
HYPER:S21–S41
D/K: R1–R12, R21–R69
L: F2–F10, B–Q, F21–F69
I: UHF B21–B69
Terminals
• AV1: / 1
21-pin Scart connector (CENELEC standard) including
audio/video input, RGB input, and TV audio/video
output.
• AV2: / 2 (SMARTLINK)
21-pin Scart connector (CENELEC standard) including
audio/video input, RGB input, selectable audio/video
output, and SmartLink interface
• AV3: 3
Y:1 Vp-p, 75 ohms, 0.3V negative sync
P :0.7 Vp-p, 75 ohms
B
P :0.7 Vp-p, 75 ohms
R
3 Audio input (phono jacks)
500 mVrms
Impedance: 47 kilo ohms
• AV4: 4S video input (4-pin mini DIN)
4 Video input (phono jack)
4 Audio input (phono jacks)
• AV5: 5
PC Input (15 Dsub) (see page 35)
G: 0.7 Vp-p, 75 ohms, non Sync on Green
B: 0.7 Vp-p, 75 ohms, non Sync on Green
R: 0.7 Vp-p, 75 ohms, non Sync on Green
HD: 1-5 Vp-p
VD: 1-5 Vp-p
PC audio input: minijack.
• Audio output (Left/Right) (phono jacks)
• AV6: 6 (KLV-S40A10E, KLV-S32A10E, KLV-
S26A10E only)
HDMI: Video: 480i, 576i, 480p, 576p, 720p, 1080i
Audio: Two channel linear PCM 32, 44.1 and
48 kHz, 16, 20 and 24 bits.
AUDIO:500 mVrms (100% modulation)
Impedance: 47 kilo ohms
• i Headphones jack