Inhaltsverzeichnis
Werbung
SPECIFICATIONS
Electrical
Model
Preinstalled
No.
Heater
1
LTC 9483/50C
Heater
1.The heater operates at 50/60 Hz.
Mechanical
Maximum Camera and Lens: LTC 9483/50C: 68 W x
54 H x 267 L mm (2.68 x 2.1 x 10.5 in)
1. With heater.
Cable Entry:
LTC 9483/50C: 4-pin Amphenol-Yuchel connector accepts
cable diameters 8.0 mm to 9.5 mm (0.31 in to 0.38 in).Two
bottom feed-through liquid tight fittings accept cable
diameters from 4.6 mm to 7.9 mm (0.18 in to 0.31 in).
Window: 3 mm (0.12 in) thick UV-stabilized polycarbonate.
Housing Mounting: Four (4) available 1/4-20 tapped
holes. Only one set of two are required for mounting.
Camera Mounting: Removable camera bracket. Mounted
with two screws.
Construction: Aluminum cover, aluminum base, aluminum
mounting foot, polycarbonate faceplate, glass reinforced
polycarbonate end caps, neoprene gasket, ethylene
propylene seal, and all stainless steel hardware.
Finish: Dark mushroom.
Dimensions: See drawing.
Weight: (approx.)
LTC 9483 Series: 1.8 kg (4 lb).
107
4.2
Ó
9498 961 36711 00-09
2000 Philips Electronics N.V.
Ó
Printed In U.S.A.
2000 Philips Communication, Security & Imaging, Inc.
All Rights Reserved. Philips
Philips Electronics N.V.
Data subject to change without notice
Voltage/
Use with Camera
Power
Models with These
V/W
Voltage Ratings
230/23
230
1
.
96
3.8
LTC 9483 Series
Ò
is a registered trademark of
Environmental
Temperature: At external temperature of -40 °C to
+50 °C (-40 °F to +122 °F) maintains internal temperatures
between -20 °C and +55 °C (-4 °F to +131°F) with heater.
Salt Atmosphere: MIL-STD-810E, Method 509, Procedure 1.
Enclosure Protection: Designed to NEMA-3R, IP55.
Electromagnetic Compatibility
Safety:
UL, cUL
Designed to meet CE requirements.
Accessories
Sunshield: Provides protection from the direct rays of sun
and promotes cooling to reduce internal housing
temperatures. Strongly recommended for housing to be
used outdoors.
LTC 9083/00: For LTC 9483 Series housings.
LTC 9080/00 Tamper Resistant Kit: Includes 10 screws
and insertion tool to permit tamper resistance for five
housings.
LTC 9215/00 Feed-through Mount: Attached to the
foot of the housings allows wires to be fed-through the
mount and into the foot of the housing.
LTC 9219/01 Feed-through J-Mount: Allows housing to
be mounted from ceiling.
Suggested Applications:
Camera Model
LTC 9483 Lens
LTC 0140
Fixed/Vari-focal
LTC 0240
Fixed/Vari-focal
LTC 0330
1
Fixed/Vari-focal
LTC 0350
1
Fixed/Vari-focal
LTC 0430
1
Fixed/Vari-focal
LTC 0450
1
Fixed/Vari-focal
1. The camera mounting block must be removed.
404
15.9
259
10.2
50.8
20
2.0
0.8
8
73.7
mm
0.3
2.9
in
89
3.5
Werbung
Inhaltsverzeichnis
