Herunterladen Inhalt Inhalt Diese Seite drucken

Important Safety Instructions; Fcc Information - Philips Dinion LTC 0455 Serie Installation

Color cameras
Inhaltsverzeichnis

Werbung

IMPORTANT SAFETY INSTRUCTIONS

The lighting flash with arrowhead sysbol,
within an equilateral triangle, is intended
to alert the user to the presence of
uninsulated "dangerous voltage" within the
product's enclosure that may be of
sufficient magnitude to constitute a risk to
persons.
The exclamation point, within an
equilateral triangle, is intended to alert the
user to the presence of important operating
and maintenance accompanying the
appliance.
1.
Read these instructions
2.
Keep these instructions.
3.
Heed all Warnings.
4.
Follow all instructions.
5.
Do not use the apparatus near water.
6.
Clean with a dry cloth only.
7.
Do not install near heat sources such as
radiators, heat registers, stoves, or other
apparatus that generates heat (including
amplifiers).
8.
Do not defeat the purpose of a polarized or
grounded mains plug. A polarized plug has
dissimilar prongs (one wider than the other) to
ensure correct polarity, while a grounded plug
has an additional 'ground' prong provided for
your safety. If the plug supplied with the
apparatus does not fit into your outlet, consult
an electrician for advice.
9.
Protect the power-supply cord from being
walked on or pinched, particularly close to
plugs, receptacles and the point where it exits
from the apparatus.
10.
Only use attachments and accessories
(including stands, tripods, mounting brackets
and housings) specified or recommended by the
manufacturer.
11.
Unplug the apparatus during lightning storms
and when unused for extended periods.
12.
Do not attempt to service this unit yourself as
opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
13.
Servicing is required when the apparatus does
not function in the normal way, has been
dropped, if liquid has been spilled on it, or if it
has been exposed to rain or water. Unplug the
unit from the outlet and refer servicing to
qualified service personnel.
14.
An all-pole mains switch with contact
separation of at least 3 mm in each pole shall be
incorporated in the electrical installation of the
building.
Warning
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.

FCC Information

Caution: Any changes or modifications to
construction of this device that are not expressly
approved by the party responsible for compliance
could void the user's authority to operate the
equipment.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
Re-orient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV
technician for help.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Dinion ltc 0435 serie

Inhaltsverzeichnis