Inhaltsverzeichnis; Model Designation; Maximum Camera/Lens Size; Tools Required - Philips Dinion LTC 0455 Serie Installation

CONTENTS
1 UNPACKING . . . . . . . . . . . . . . . . . . . . . . . . . . .5
2 ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . .5
2.1 Sunshields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
2.2 Tamperproof Kit . . . . . . . . . . . . . . . . . . . . . . . . . .5
3 SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
4 CARE AND MAINTENANCE . . . . . . . . . . . . . . .5
5 DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . .5
6 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . .5
6.1 Model Designation . . . . . . . . . . . . . . . . . . . . . . . .5
6.2 Maximum Camera/Lens Size . . . . . . . . . . . . . . . . .5
6.3 Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . .5
6.4 Cable Requirements . . . . . . . . . . . . . . . . . . . . . . . .5
6.5 Housing Mounting . . . . . . . . . . . . . . . . . . . . . . . .6
6.6 Cover Removal . . . . . . . . . . . . . . . . . . . . . . . . . . .6
6.7 Camera/Lens Installation . . . . . . . . . . . . . . . . . . . .6
6.8 Camera/Lens Wiring . . . . . . . . . . . . . . . . . . . . . . .8
6.8.1 Power Connections:
LTC 9483/50C, LTC 9488/50C . . . . . . . . . . . . .8
6.8.2 Control Connections: LTC 9488/50C Only . . . . . .9
6.9 Video Coax Connection . . . . . . . . . . . . . . . . . . . . .9
6.10 Camera/Lens Adjustment . . . . . . . . . . . . . . . . . . . .9
6.11 Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
6.12 Fuse Replacement . . . . . . . . . . . . . . . . . . . . . . . .10
7 EXPLODED VIEW . . . . . . . . . . . . . . . . . . . . . .10
7.1 Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
1 UNPACKING
Unpack carefully. This is mechanical equipment and should be
handled with care.
Check for the following:
Housing (with correct model number).
I
Hardware Kit - LTC 9483/50C & LTC 9488/50C:
I
1 1/4-20 × 3/8-in button head screw.
2 1/4-20 × 1/2-in button head screw.
1 Connector plug, 4-pin female Amphenol 16T3109-001.
1 Connector, 15-pin female Ampenol C016 10e0140021
(LTC 9488/50C only).
9 Female socket pins (LTC 9488/50C only).
2 1/4-in spring washers.
1 Spacer block.
2 2.0 × 10 mm screws.
If an item appears to have been damaged in shipment, replace it
properly in its carton and notify the shipper. If any items are
missing, notify your Philips Communication, Security &
Imaging Sales Representative or Customer Service Representive.
The shipping carton is the safest container in which the unit
may be transported. Save it for possible future use.
2 ACCESSORIES
2.1 Sunshields
Provide protection from the direct rays of sun and promote
cooling to reduce internal housing temperatures. Strongly
recommended for housing to be used outdoors.
LTC 9083/00: For LTC 9483 Series Housings.
LTC 9088/00: For LTC 9488 Series Housings.
2.2 Tamperproof Kit
Contains tamper resistant screws and bit key to tamperproof up
to five housings.
LTC 9080/00: For all LTC 9480 Series Housings.
3 SERVICE
If the unit ever needs repair service or parts, the customer
should contact Philips Communication, Security & Imaging
Service Center for authorization to return and shipping
instructions.
4 CARE AND MAINTENANCE
Regularly scheduled maintenance will help prolong the
operation life of this unit. Clean the viewing window as needed
with a mild, nonabrasive detergent in water and a soft cloth.
5 DESCRIPTION
The LTC 948x Series Housings are smart, stylized housings for
indoor and outdoor use. These housings meet customers'
demands for an attractive housing that is both cost competitive
and easy to install. They are available in three sizes to fit a wide
range of cameras and lenses.
6 INSTALLATION
This installation should be made by qualified service personnel
and conform to the National Electrical Code and applicable
local codes.
6.1

Model Designation

Model Preinstalled
No. Heater
LTC 9483/50C Heater
LTC 9488/50C Heater
Note: The heater operates at 50/60 Hz.
6.2

Maximum Camera/Lens Size

LTC 9483/50C: 68 W x 54 H x 267 L mm (2.68 x 2.1 x 10.5 in)
LTC 9488/50C: 71 W x 71 H x 356 L mm (2.8 x 2.8 x 14.0 in)
6.3

Tools Required

- Small flat blade screwdriver.
- Phillips screwdriver (P2).
- Adjustable wrench.
- Wire cutter/stripper/crimper tool.
- 5/32-in (or 4 mm) hex wrench.
6.4

Cable Requirements

Video Transmission (Coaxial)
Cable Type: RG-59/U for runs < 300 m (1000 ft).
RG-11/U for runs < 600 m (2000 ft).
5
Voltage/ Use with Camera
Power Models with These
V/W Voltage Ratings
230/23 230
230/40 230