Installation - Hitachi HC-A8MB Installations- Und Betriebshandbuch

Installation

3 INSTALLATION
3.1 SAFETY SUMMARY
D A N G E R
• Read carefully this manual before performing the installa-
tion work.
• Do not install this device in places accessible to the gene-
ral public. Install it in electrical enclosures, which are only
accessible by the usage of a tool and also provide protec-
tion to eventual electromagnetic disturbances.
• Do not connect power supply before the device installa-
tion is correctly done. Always disconnect power supply
from the device before any maintenance or servicing ac-
tion.
C A U T I O N
• This appliance must be used only by adult and capable peo-
ple, having received the technical information or instructions
to handle properly and safely this appliance.
• This is a Class A product. In a domestic environment this
product may cause radio interferences in which case the user
may be required to take adequate measures.
3.2 FACTORY-SUPPLIED COMPONENTS
Gateway device
1x
3.3 DIMENSIONAL DATA
3 PMML0351A rev.0 - 11/2014
• Children should be supervised to ensure that they do not play
with the appliance.
• Check to ensure that the field supplied electrical components
(mains power switches, circuit breakers, wires, connectors
and wire terminals) have been properly selected according to
the electrical data indicated on this document and they com-
ply with national and local codes. If it is necessary, contact
with your local authority in regards to standards, rules, regula-
tions, etc.
• Do not install Network / Modbus gateways in places:
-
-
-
-
Instruction manual
1x
where any vapor, oil or other dispersed liquids could affect
the device.
where accumulation, generation or leaks of inflammable
gases has been detected.
near to any heat sources or electromagnetic noise sourc-
es.
that they are near to the sea, in saline, acid or alkaline
surroundings.
USB Pen Drive Memory
1x