Direct Programming - Timer Setting - SMART CX01 Bedienungsanleitung

PVR / Recording
3.3

Direct Programming - Timer Setting

This submenu can be used to program, edit and delete up to eight different re-
cordings (or channel switches).
1. In the submenu Timer Setting, mark a timer by using the keys
/ PR-.
2. Press the OK key to open the timer.
3. Mark the line Timer Mode by using the keys
4. You can select from the following possibilities by using the keys /
/ :
Value Meaning
Off The timer is deactivated.
Once Recording of a single program.
Daily Recording every day at the same time (e.g. the news program
every day)
Weekly Recording always at the same weekday
Monthly Event occurs every month at the same day (e.g. every 20
Mo - Fr Recording Monday to Friday at the same time .
5. Mark the line Timer Service by using the keys
You can select from the following possibilities by using the keys /
/ :
Value Meaning
Record The programmed program will be recorded on the USB data
storage.
Channel The programmed program will be displayed on the screen, but
NOT recorded.
6. Mark the line Wakeup Channel by using the keys
select the channel to be recorded or displayed by using the keys /
/ .
18
/ PR+ and
/ PR+ and / PR-.
/ PR+ and / PR-.
/ PR+ and / PR-, and
and
th
)
and
and
smart CX01