TechnoTrend TT ScartTV T101 Gebrauchsanleitung Seite 66

®
TT ScartTV T101 Digital Terrestrial Receiver
3. Plug the plug of the infrared receiver into the IR REMOTE (G) connec-
tion socket. The plug is to be inserted all the way in.
4. Place the sensor as to enable "viewing contact" between the sensor
and the remote control. If required, fix the sensor using the included
adhesive tape.
5. First insert the pluggable power supply into the mains connection
socket (C), then plug the other end into a properly installed power out-
let corresponding to the "Technical data".
Note:
If you also want to receive analog channels in addition to the digital
channels, the analog signal of these channels has to be "looped
through". Thus, connect the antenna RF OUT (F) socket of the receiver
with the antenna IN of your TV set using a coaxial cable (not included).
14
1.
3.
4.
5.
2.