Define Default Partitions; Pvr Configuration - Avanit SHD5 Bedienungsanleitung

Menu REC
)
4.1.3

Define Default Partitions

The menu item Tools is used to define default partitions for TV recordings and
timeshift files.
1. Select the data storage for which utilization should be defined.
2. Press the blue L/R key. A new window DVR Set will open.
3. Using the keys /
x REC & TMS: the partition is used both for recording and for timeshift.
x Record: the selected partition is only used for recording.
x Timeshift: the selected partition is only used for timeshift.

4.2 PVR Configuration

A Personal Video Recorder is a video recorder offering the possibility to save video
and audio information on a digital storage medium (e.g. hard drive).
¾ Select Timeshift to set - using the keys /
cordings (see page 18, Timeshift) should automatically start when pressing the
key, or if timeshift is to be deactivated.
¾ Select Timeshift to Record to set - using the keys /
timeshift recordings should be saved to the USB data storage when pressing the
Record key.
)
20
In general, NTFS would be the better selection, but it is not
supported by old PC operating systems (e.g. Windows98).
Thus, it's recommended to use the file system FAT32 for com-
patibility reasons. With FAT32, the max. size of a file is limited to
4GB. If a recording exceeds such file size, then the file will be
automatically separated into several parts.
and /
In case of On, recording is not only performed starting at such
point in time when pressing the Record key, but the timeshift
file made so far is also added to the record.
In case of Off, recording is performed starting at such point in
time when pressing the Record key. The timeshift file made so
far is not added to the record ("normal" instant recording).
, select how to use the data storage:
and / - if timeshift re-
and / - if the
AVANIT SHD5