Werbung
Verfügbare Sprachen
Verfügbare Sprachen
If any item is missing, please contact the shop where you bought this product.
-
One DN-13007 USB MFP Server.
-
One DN-13007 MFP Control Center Software CD.
-
One DC IN 12V/1A Adaptor.
-
This Quick Installation Guide.
③ . OS Requirements
1. Windows 98 SE/ME/2000/XP/2003
2. Unix, Linux , Apple OS X 10.3x and RFC-1179 LPD System
④ . Physical Description
Please refer to Fig 1, Physical Description.
1. Power Adaptor Connector: DC IN 12V/1A adaptor
2. Init Button: print the configuration page and initialize the server
3. Ethernet Connector: a twisted pair category 5 cable
4. USB Host Ports: USB 1.1/2.0 low, full and Hi-Speed compliant
5. Indicators
Power Indicator is lit while power is applied. If it is not lit, or if it blinks,
there is a problem with the MFP server or Power Adapter.
Link Status is lit while network is applied. If it is not lit, it indicates that
the server does not connect the network.
Status Indicator blinks to indicate network activity.
USB1 Indicator is lit while an USB device connects to USB1 Port of the
MFP server. If it is not lit, or if it blinks, there is a problem with the USB
device or the MFP server.
USB2 Indicator is lit while an USB device connects to USB2 Port of the
MFP server. If it is not lit, or if it blinks, there is a problem with the USB
device or the MFP server.
⑤ . Connect the DN-13007
1. Connect DN-13007 to the network, such as a LAN switch or a LAN hub,
using a LAN cable.
2. Connect DN-13007 to USB printers, hard drives or flash ROM disks, and HP
all-in-one series printers (AIO/MFP) using USB cables.
3. Connect DN-13007 to the power jack using the power adaptor (included in
this package).
⑥ . Install Utility
7
Werbung
