Installation Instructions; Instructions For Attaching The Decorative Strips - Fluval Roma Benutzerhandbuch Für Die Strip-Light-Abdeckung

13. SAVE THESE INSTRUCTIONS: For the correct use and understanding of this canopy it is
recommended that this manual is thoroughly read and understood. Failure to do so may result
in damage to this canopy.

INSTALLATION INSTRUCTIONS

WARNING: Disconnect the plug of all electrical equipment used for the aquarium, before placing
your hands in aquarium water and/or performing any maintenance of any kind.
Instructions for attaching the decorative strips onto the top frame of
the Roma Aquarium
1. Before you begin, verify you have a complete set of decorative strips.
Decide which of the two colour options best suits your home and then
place each strip against the correct position on the top frame of the light
canopy.
2. Clean the surface of any dust or dirt with a damp cloth prior to
application. Do not use harsh or abrasive detergents which may damage
the surface.
3. Dry the surface thoroughly.
4. Peel back part of the film from one end of the decorative strip and adhere the edge of it in the
appropriate seat on the top frame.
5. Ensure the applied edge is stuck securely and gently follow along the entire length of the strip, peeling
back the clear film and taking care to keep the strip correctly aligned.
6. Once the entire strip is positioned in place, press firmly along the full length to ensure it is fully
adhered.
7. Proceed as previously indicated for each decorative strip.
1
4
Fluval Roma instructions.indd 6
2 3
5
6
4
6
09/07/2007 17:09:27