Bosch GEX Professional 125-150 AVE Originalbetriebsanleitung Seite 14

14 | English
Random orbit sanders
No-load orbital stroke rate
Orbit diameter
Weight according to EPTA Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Noise/vibration information
Noise emission values determined according to EN 62841-2-4.
Typically, the A-weighted noise level of the power tool is: 82 dB(A); sound power level 93 dB(A). Uncertainty K = 1.5 dB.
Wear hearing protection!
Total vibration values a (triax vector sum) and uncertainty K determined according to EN 62841-2-4:
h
Application
Measurement according to EN 62841-2-4 for sanding tools (using sanding paper with 180 grit):
Sanding with maximum removal rate
Intermediate lacquer sanding
Fine sanding of softwood
Fine sanding of hardwood
Fine sanding of veneer
Sanding down old paint and varnish
Sanding metals
Sanding bodyfiller
Sanding wooden and veneer edges
Intermediate lacquer sanding on edges
Sanding thermoplastic synthetic materials
Measurement according to EN 62841-2-4 for polishers (with lambswool bonnet):
Polishing
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure detailed in EN 62841
and may be used to compare power tools. They may also be
used for a preliminary estimation of vibration and noise
emissions.
The given vibration level and noise emission value represent
the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
Selecting the Sanding Sheet
Different sanding sheets are available, depending on the material you are working with and the required surface removal rate:
1 609 92A 49A | (17.05.2018)
GEX 125 AVE
rpm 11,000–24,000 11,000–24,000
mm 4
kg 2.4
/ II
Orbital stroke rate Pressing force
level [N]
6 50
5–6 10–20
5–6 0–10
5–6 10–20
5–6 10–20
5–6 30–40
5–6 30–40
5–6 20–30
3–4 0–10
3–4 0–10
1–2 0–10
1 0–10
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping the hands warm,
and organising workflows correctly.
Assembly
Pull the plug out of the socket before carrying out any
u
work on the power tool.
GEX 150 AVE GEX 125-150 AVE
11,000–24,000
4
2.4
/ II
a K
h
2 2
[m/s ] [m/s ]
2.5 1.5
2.5 1.5
2.5 1.5
2.5 1.5
2.5 1.5
2.5 1.5
2.5 1.5
2.5 1.5
5.5 1.5
5.5 1.5
7.5 1.5
3.5 2.5
Bosch Power Tools
4
2.4
/ II