Setting The Date And Time; Turn The Camera On; Set The Date And Time - Canon PowerShot D20 Handbuch: Erste Schritte

Initial Preparations
Check the card's write-protect tab
and insert the memory card.
Recording is not possible on memory cards
with a write-protect tab when the tab is in the
locked (downward) position. Slide the tab up
until it clicks into the unlocked position.
Insert the memory card facing as shown until
Label
it clicks into the locked position.
To remove the memory card, push it in until
you feel a click, and then slowly release it.
Close the cover.
Lower the cover in the direction of the arrow
and press it until it clicks into the closed
position.
Make sure the lock returns to the position
Red Mark
shown, with the red mark no longer visible.

Setting the Date and Time

Turn the camera on.

Press the ON/OFF button.
The Date/Time screen is displayed.

Set the date and time.

Press the qr buttons to choose an option.
Press the op buttons to specify the date
and time.
When finished, press the m button.
4