Setting The Date And Time - Canon PowerShot SX240 HS Handbuch

Initial Preparations

Setting the Date and Time

4
Check the card's write-protect tab
and insert the memory card.

Recording is not possible on memory cards
with a write-protect tab when the tab is in the
locked (downward) position. Slide the tab up
until it clicks into the unlocked position.

Insert the memory card facing as shown until
it clicks into the locked position.

To remove the memory card, push it in until
Terminals
you feel a click, and then slowly release it.
Close the cover.

Lower the cover (
slide it, until it clicks into the closed position
(
Turn the camera on.

Press the ON/OFF button.

The Date/Time screen is displayed.
Set the date and time.
 Press the qr buttons to choose an option.
Press the op buttons or turn the 5 dial to

specify the date and time.
 When finished, press the m button.
) and hold it down as you
).