Renkforce 751781 Bedienungsanleitung Seite 50

Programming master and user codes for several users
User Digits
0
1 00 - 99
2 0 - 9
3 0 - 9
Programming the „Output 1" relay
40 1 to 999
41
42
50
4 to 8 # After entering "0" you can program the personal
master code to any value. This can have 4 to 8 digits.
Press the # key to save this.
4 to 8 # After entering "1" you can program user code 1 to
any value. This can have 4 to 8 digits for 100 users
(00 - 99). Press the # key to save this.
4 to 8 # After entering "2" you can program user code 2 to
any value. This can have 4 to 8 digits for 10 users
(0 - 9). Press the # key to save this.
4 to 8 # After entering "3" you can program user code 3 to
any value. This can have 4 to 8 digits for 10 users
(0 - 9). Press the # key to save this.
# After entering User code 1 and pressing the # key, relay 1
switches on for the programmed time (1 to 999 seconds).
# After entering User code 1 and pressing the # key, relay 1
toggles (either from closed to open or from open to closed).
# After entering User code 1 and pressing the # key, relay 1 tog-
gles (from closed to open or vice-versa).
This programming also allows the use of a short code for
switching (the first two digits of code 1).
Additionally, this programming permits use of a short code
(only the first two digits of code 1) to switch on.