C) Programming Explanation - Renkforce 751781 Bedienungsanleitung

c) Programming explanation

*
0000 Master code (on delivery)
You can perform all programming operations after entering the master
code (0000) and then pressing the * key.
All further programming steps can only be done after entering the master code and
confirming it with the * key. Multiple programming steps can be carried out one
after the other.
Press the * key to leave the programming mode.
Programming the system for one or more users
8900 # For one user: all previous program settings are reset.
8901 # For several users: all previous program settings are reset.
Programming master and user codes for one user
0 4 digits, fixed
1 4 digits, fixed
2 4 digits, fixed
3 4 digits, fixed
# After entering "0" you can program the personal mas-
ter code to any value. This must be 4 digits long. Press
the # key to save this.
# After entering "1" you can program user code 1 to
any value. This must be 4 digits long. Press the # key
to save this.
# After entering "2" you can program user code 2 to any
value. This must be 4 digits long Press the # key to save
this.
# After entering "3" you can program user code 3 to
any value. This must be 4 digits long. Press the # key
to save this.
49