Philips HP6370 Bedienungsanleitung Seite 10

EnglisH
10 10
Cleaning the handle and adapter
1 Clean the handle with the cleaning brush or under a running tap.
Note: Make sure that the handle is completely dry before you reassemble the appliance.
2 If necessary, clean the adapter with the cleaning brush or a dry cloth.
Always keep the adapter dry. Never rinse it under the tap or immerse it in water.
Cleaning the shaving head
1 Press the on/off button to switch off the appliance (Fig. 20).
2 Pull the shaving head off the appliance (Fig. 6).
Do not exert pressure on the double shaving foil to avoid damage.
3 Push the cutting unit release slide to the right (1) and remove the
cutting unit (2) (Fig. 21).
4 Clean the cutting unit and the inside of the shaving head with the cleaning brush. Also
brush away any hairs that have collected under the trimmer (Fig. 22).
Caution: Do not brush the foil to avoid damage to the brush or the foil.
5 You can also rinse the cutting unit and the shaving head under the tap. To dry the cutting
unit and the shaving head, shake them firmly (Fig. 23).
6 Place the cutting unit back onto the shaving head ('click') (Fig. 24).
Note: Make sure that the shaving head and the cutting unit are completely dry before you
reattach them onto the appliance.
Cleaning the precision trimming head and combs
1 Press the on/off button to switch off the appliance. (Fig. 25)
2 If a comb is attached to the precision trimming head, remove the comb (Fig. 10).
3 Remove the precision trimming head (Fig. 8).
4 Brush the hairs off the precision trimming head or rinse it under the tap (Fig. 26).
5 Brush the hairs off the combs or rinse them under the tap.
6 You can also rinse the precision trimming head and the combs under the tap. To dry
them, shake them firmly or use a tea towel (Fig. 27).
7 To reattach the precision trimming head, slide it into the guiding grooves on both sides
of the opening in the handle ('click') (Fig. 7).
Note: Make sure that the precision trimming head is completely dry before you reattach it onto
the appliance.
maintenance
1 Lubricate the cutting unit (double shaving foil and trimmer) or the precision trimming
head, when attached on the handle, with a drop of sewing machine oil twice
a year. (Fig. 28)