Schego schegoLUX-mini Bedienungsanleitung Seite 16

schegolux.book Seite 16 Donnerstag, 1. Juli 2010 11:30 11
Connecting the schegoLUX~mini
check its stability.
NOTE:
Apart from using the base, which is delivered with the spotlight, you may also position
the spotlight by using the optionally available tree or post holder schegoLUX-Fix
( Page 18, Pos. 14).
Connecting the schegoLUX~mini
ATTENTION:
Incorrect voltage can damage the spotlight. You should only connect the spotlight to a
transformer with maximum 12V output.
1. Connect the plug connector (Fig. 1/3) with the transformer (not part of the delivery).
ATTENTION:
Incorrect voltage can damage the transformer. Only connect the transformer, if the
electric voltage specified on the transformer complies with the voltage of your wall
outlet.
2. Insert the mains plug of the transformer into an earthing contact socket.
Faults
Before submitting claims for damage to the spotlight you should first try to rectify the
fault yourself by following this table.
Malfunction
Spotlight does not light
16
Cause Remedy
Illuminant defective Replace the spotlight
Pug connection to Check plug connection
transformer interrupted
Transformer defective Replace the transformer