next base SDV48-A Bedienungsanleitung Seite 8

08 ENG
System Connection
SDV48-AM / SDV49-AM
Twin screen system with one DVD player and one monitor.
DVD PLAYER
Connect between the DVD player and the monitor, using the supplied Audio-Video / Power
cable, as shown above.
DVD PLAYER
Connect either the domestic mains adaptor or the car adaptor to the master DVD player to
enable both screens to work, as above.
NOTE:
• Whilst the master DVD player can be used from the internal battery, there is no battery in the
slave monitor so either the car adaptor or the domestic mains adaptor is required to power
the monitor.
• For use in 12Vdc vehicles only, NOT 24Vdc vehicles, or damage will result.
• Always start the vehicle engine before connecting the DVD player to the supply or damage
could result due to electrical surges during engine start.
• To charge the internal battery of the DVD player, connect either power supply method above
and switch to the "OFF/CHARGE" position.
• Always connect master & monitor before plugging in power supply, failure to do so may lead
to a buzzing sound from the monitor or damage could result.
DC-OUT
AV IN/OUT
DC-IN
AV IN
DC-IN
OR
MONITOR
MONITOR