next base SDV48-A Bedienungsanleitung Seite 36

36 ENG
Problem
USB media will not play
SD/MMC Card media will not play
DVD player will not work
Monitor will not work
Monitor shows no audio or video
image
Second screen in a SDV48-AC /
SDV49-AC system does not show
the image from the other DVD
player
Video, Music and Photo's may not be of the correct format.
Ensure that any video recording is an official DivX type.
(See earlier in manual) Music, MP3 and Photo JPEG
formats.
Use only USB sticks plugged directly to the USB socket
and formatted in FAT 32.
Check media device is not damaged.
Video, Music and Photo's may not be of the correct format.
Ensure that any video recording is an official DivX type.
(See earlier in manual) Music, MP3 and Photo JPEG
formats.
Check SD/MMC card is inserted correctly and is not
damaged.
Turn Power switch to ON. Battery may be exhausted.
Connect the car adaptor or AC adaptor to DC-IN socket.
Check the player LED indicator illuminates to show player
is receiving power. If the player LED indicators do not
illuminate then check cables for damage and correct
connection.
Check the fuse in the car adaptor (see earlier section of the
manual). Re-check by using the domestic mains adaptor.
Turn Power switch to ON. There is no battery in the
monitor, so ensure that the external 12Vdc supply is
working, by plugging directly to the monitor DC-IN socket.
If working, check power supply cables for damage and
correct connection.
Check the fuse in the car adaptor (see earlier section of the
manual). Re-check by using the domestic mains adaptor.
Check the AV connection cable between DVD player and
monitor is connected correctly and plugs are fully inserted.
Check for power to the monitor, see earlier section.
Press the DVD / IN button on the remote control to enable
this feature.
Solution