Use Of The Remote Control - next base SDV48-A Bedienungsanleitung

16 ENG

Use of the Remote Control

As supplied, a new battery is already fitted to the remote control. To activate, simply pull out the
isolating tab, where it says PULL.
To replace the battery in the remote control, see illustration below.
1) Push down tab.
2) Pull out tray
3) Insert battery with + to
the back
4) Refit
When using the remote control, make sure the remote is pointed to the infrared receiving
window of the DVD player (NOT the monitor). The distance between player and remote control
must be within 3 meters. Please see below.
Notices
1. Do not drop or step on the remote control or subject it to shock or liquid.
2. Do not expose the DVD player to direct sunlight or this may prevent the remote control from
working normally.
3. If the remote control stops working, replace the battery with a new one, type Cr2025.
4. With an SDV48-AM / SDV49-AM the remote control must be pointed at the DVD player, not
the monitor.
5. With an SDV48-AC / SDV49-AC there are two identical remote controls supplied, to simplify
matters. Just point the remote control at the specific DVD player to control it.