Basic Operation - next base SDV48-A Bedienungsanleitung

Basic Operation

Playback of Media from disc.
DivX
1. DVD mode is the default after power is switched ON, but can also be selected by pressing
MODE. Press or
2. Carefully Open the LCD screen and insert a disc on to the spindle with the label side facing
towards you.
Once the LCD screen is fully open, do not use force to open further
PLEASE NOTE:
Damage caused to the DVD player by opening the LCD screen beyond the design limit is not
covered under the manufacturers warranty.
3. Close the LCD screen. The player will load the disc and start playing.
4. Press once to stop playback; then press
you stopped. Press
5. During playback, press
6. When the playing is finished, please turn the power off by sliding the ON/OFF switch to OFF.
7. For some DVD discs with Title or Chapter menus, press the "MENU" button to enter the
menu page, and use
Note: Please do not disconnect USB devices or unplug SD/MMC cards whilst they are playing.
Functional failure may occur, with the possible loss of data from the USB stick or
SD/MMC card.
Play / Pause
to highlight DVD, then press OK.
twice to stop playback completely.
to pause; press it again to resume playback.
to select. Press ENTER to confirm.
Navigation buttons
to resume playback from the point where
Title
ENTER
ENG2 17
Menu