In Car Installation - next base SDV48-A Bedienungsanleitung

In Car Installation

1. Fit the headrest mount to the DVD Player / Monitor as required.
fixing strap
Turn the headrest mount and player around so the backs are facing you.
fixing point
Turn the headrest and player around so the front is facing you.
NOTE: For SDV48-AM /SDV49-AM products the same design headrest mount is used for both
the player and monitor.
front straps
TOP
fixing strap
front
Slide the fixing strap through the left-hand fixing point on
the back of the player or monitor, as shown.
back
Fold the strap over on to the back of the headrest mount
and secure firmly.
Repeat process for the other strap.
Ensure the DVD player or monitor is mounted centrally.
Using the front straps secure the player or monitor as
shown.
Once secured correctly, the back of the
player (or monitor) will sit against the front
of the headrest mount.
ENG2 11