Troubleshooting - next base SDV48-A Bedienungsanleitung

Troubleshooting

Problem
No sound or distorted sound
Can't advance through a movie
The icon appears on screen
The picture is pixelated or distorted The disc may be damaged or dirty.
The disc will not play
No sound from the speakers
Remote control doesn't work
No picture
Lines on the screen
Turn the volume UP on both the remote control AND the
volume wheel on the side of the player (and monitor).
Ensure that the MUTE key has not been pressed. If using
an SDV48-AC / SDV49-AC make sure that the
interconnection cable is NOT fitted if watching different
movies on the 2 screens.
You can't advance through the opening credits and
copyright warnings at the beginning of a movie as the disk
is programmed to prevent this.
The requested operation is not allowed or available at this
time.
Clean the disc or change to another one.
The disc may be damaged or dirty.
Clean the disc or change to another one.
Poor playback may be caused by dirt on the laser lens, use
a clean, dry cotton bud (add pure alcohol sparingly if
available) and wipe across the lens VERY gently, the lens
is held by spring suspension, so be very gentle.
Check the player by using headphones. If these are
working normally then the headphone connector is
damaged and needs repairing.
Remove the battery isolating tape from original delivery.
Approach player more closely or remove any obstructions.
Replace battery for new. Type CR2025.
Check that the screen is closed firmly.
Check the broken screen identification information.
Check the DV/IN button has the DVD option chosen.
Check the broken screen identification page. Any
permanent diagonal lines are indication of breakage. The
screen glass does NOT fall out, as this is a safety feature.
Solution
ENG2 35