Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions
World time travel alarm clock
Order no.: 64 04 25
Intended Use
The product displays the time and the calendar and functions as an alarm clock.
It has the following features:
• Displays the time in hours and minutes in the 12- or 24-hour format
• Displays the local time and the world time (time of 24 cities worldwide)
• Displays the date with day of the week
• Displays the alarm time
• Alarm function (based on local time or world time, by choice)
• Torch function
The travel alarm clock may be operated only in closed, dry rooms at room temperature.
Contact with moisture must be avoided at all times.
Any use other than that described above could lead to damage to this product and involves
the risk of short circuits, fire, electric shock, etc.
These operating instructions are part of this product. They contain important notices about
commissioning and handling. Please bear this in mind in case you pass on the product to
a third party. For this reason, keep these operating instructions for future reference.
Display and Control Elements
(1)
Rotary switch
(2)
SNOOZE/LIGHT button
(3)
Alarm switch
(4)
Set switch
(5)
MONTH/HR button
(6)
DATE/MIN button
(7)
YEAR/12/24 button
(8)
DST button
(9)
Torch button
(10) RESET button
Safety Instructions and Hazard Warnings
The guarantee will lapse if damage is incurred as a result of non-compli-
ance with the operating instructions. We will not assume any responsibili-
ty for consequential damage. We will also not assume any responsibility for
damage to assets or persons caused by improper handling or failure to
observe the safety instructions. In such cases the guarantee will lapse.
For safety and licensing (CE) reasons, unauthorised conversion and/or modifications to the
product are not permitted.
The product may not be subjected to extreme temperatures, strong vibrations, heavy
mechanical strain, direct sunlight or high degrees of humidity. This can damage the device.
The device is not a toy and has no place in the hands of children.
Do not leave the packaging material lying around carelessly, since it constitutes a danger
to children.
Do not put the product into operation if it is damaged.
The manufacturer or supplier will assume no responsibility for incorrect displays or their
consequences which arise through an incorrect display.
Avoid using the appliance under unfavourable ambient conditions.
If you have questions that are not answered in the scope of these operating instructions,
please contact our Technical Support or another specialist.
Setup
Take care not to place the device in direct sunlight and protect it from
Version 05/06
vibration, dust, heat, cold, and moisture.
Place the travel alarm clock on a stable surface and ensure that it is stand-
°
ing safely. If the travel alarm clock falls down, it might injure persons or
the clock or the floor may be damaged. Place the device on a level and hor-
izontal surface. Do not place the device on valuable furniture without suit-
able protection.
Open the cover of the travel alarm clock and use the cover as a base stand.
Inserting and replacing the batteries
Make sure that the polarity is correct when inserting the batteries (pay atten-
tion to plus + and minus –).
Keep batteries out of the reach of children. Do not leave batteries lying
around. Pets or small children might swallow them. Mortal danger! If swal-
lowed, consult a doctor immediately.
Batteries may not be shorted, opened or thrown into fire. Batteries must
not be recharged. (Danger of explosion!)
Only use new batteries of the correct size and the recommended type. Do not
mix old and new batteries. Chemical liquids may leak out of overaged or
spent batteries and damage the device. For this reason, remove the batter-
ies when you do not use the device for a longer period (a month or more).
Leaking or damaged batteries can lead to caustic burning of the skin.
Therefore, use suitable protective gloves.
Remove the cover of the battery compartment.
Insert three micro batteries (AAA) with correct polarity. The correct polarity (positive and
negative) is indicated in the battery compartment. Close the battery compartment by put-
ting on the battery compartment cover and sliding it upwards until it snaps into place.
Use high-quality alkaline batteries to achieve as long a period of operation as
possible. The use of rechargeable batteries is not recommended, as their lower
voltage and capacity reduces the service life.
The display appears after insertion of the batteries.
A change of the batteries becomes necessary when the battery indicator
appears in the display or when the display lighting fades or loses brightness.
Remove the old batteries and wait about 5 minutes before inserting the new bat-
teries as described before.
Initial operation
Before the first use, remove the protective foil for protection during transit from the dis-
play.
Setting city
Above and below the rotary switch (1) there are two arrow
marks. With the rotary switch (1) you can select different
world cities, whose respective time is indicated in the lower
right of the „WORLD" display. This time is called world time
in these instructions.
The city between the two arrow marks determines the indi-
cation in the „WORLD" display.
The city closest to your home location and which is in the
same time zone as your place of residence is designated
„home city".
The time of the home city is shown in the top left of the dis-
play. This time is called local time in these instructions.
Setting the date
• Turn the rotary switch (1) to your desired home city or a city in the same time zone as
your home city. For cities in Germany select the setting „Paris" (same time zone as
Berlin).
• Slide the set switch (4) to position „CAL". The year indicator will flash in the display.
• The set buttons for the year, month and date are on the back in the battery box. Adjust
the current date with these buttons.
• You can set the year with the YEAR/12/24 (7) button.
• Using the button MONTH/HR (5) you can now set the month.
• Using the button DATE/MIN (6) you can now set the date.
Holding the button down accelerates the setting (quick setting).
Adjusting the day of the week is not necessary, as it is determined automatically.
Meaning of the day of the week display:
SUN
MON =
TUE
WED
=
Sunday
THU =
Monday
FRI
=
=
Tuesday
SAT =
=
Wednesday
Local time Calendar
Alarm time World time
Thursday
Friday
Saturday
Werbung
