Safety Information; A) General Information - VOLTCRAFT DL-201 Bedienungsanleitung

5. SaFETy INForMaTIoN

Please read the operating instructions completely before commissioning
the device. They contain important information for correct operation. The
guarantee/warranty will expire if damage is incurred resulting from non-
compliance with the operating instructions! we do not assume any liability
for consequential damage! we do not assume any liability for damage to
property or personal injury caused by improper use or the failure to observe
the safety instructions! In such cases the warranty/guarantee is voided.
This device left the manufacturer's factory in safe and perfect condition. To
maintain this condition and to ensure safe operation, the user must observe
the safety information and warning notes in these operating instructions.

a) general information

• For safety and approval reasons (CE), unauthorised conversion and/or modifica-
tion of the device are not permitted.
• Consult an expert when in doubt as to the operation, the safety or the connection
of the device.
• Meters and accessories are not toys and have no place in the hands of children!
• The product must not become damp or wet! Please ensure that the meter is
installed rain- or precipitation-protectedly when installing it.
• In commercial institutions, the accident prevention regulations of the Employer's
Liability Insurance Associations for Electrical Systems and Operating Materials
are to be observed.
• In schools, training centres, computer and self-help workshops, handling of
meters must be supervised by trained personnel in a responsible manner.
• Check the meter and its measuring prods for damage before each measurement.
Never carry out any measurements if the protecting insulation is defective (torn,
ripped off, broken, etc.).
• Avoid operation in direct proximity of strong magnetic or electromagnetic fields,
transmitter aerials or HF generators. This could affect the measurement.
• If you have reason to assume that safe operation is no longer possible, discon-
nect the device immediately and secure it against inadvertent operation. It can be
assumed that safe operation is no longer possible if:
29