Inhaltsverzeichnis
Werbung
The display shows data, but these data do not chan-
ge when the front wheel is in motion:
• There is no signal from the sensor (The wheels of the
small cyclist on the display do not turn. The distance
between magnet and magnet sensor is too large.)
• The computer is not properly fitted into its support
After a battery exchange, all display functions shine
simultaneously, the computer shows confused
symbols:
• Remove the battery and wait for approx. 1 minute,
then reinsert the battery.
The displayed data are incorrect:
• Check the correct setting of the diameter of the wheel
(see section on the setting of the diameter of the
wheel)
The display no longer works, the display has no
contrast:
• Check the battery of the computer; replace it if neces-
sary.
54
59
Werbung
Inhaltsverzeichnis
