Conrad CEI 5 Bedienungsanleitung Seite 7

(9)
Transformer Connection
8 V - 14 V DC/AC
Push Button
+ (~)
(6)
(7)
(8)
Door chime
button
Attention!
Wird der Sender CEI 5 im Batteriebetrieb genützt, darf an den
Befestigungschrauben (6) und (8) keine Spannungsquelle (Netz-
teil/Trafo) angeschlossen werden.
AC voltage operation/DC voltage operation of the CEI
5 auxiliary transmitter:
If the CEI 5 transmitter is operated with an appropriate transfor-
mer or power supply (8-14 VAC or 8-14 VDC, 150 mA min. output
current), then remove the battery (4) from the battery compart-
ment.
Connect both leads of the transformer/power supply via a door
chime button (contact) to the fixing screws (6) and (8).
Attention!
Observe the CEI 5 transmitter polarity when connecting a DC
voltage power supply.
12
- (~)
Any other connection than described above can lead to damage
to this product; in addition, this is accompanied by dangers such
as for example short circuit, fire, electric shock etc.
Connection of an AC voltage transformer:
(9)
Transformer Connection
8 V - 14 V DC/AC
Push Button
+ (~)
(6)
(7)
(8)
Door chime
button
Connection of a DC voltage power supply:
(9)
Transformer Connection
8 V - 14 V DC/AC
Push Button
+ (~)
(6)
(7)
(8)
Door chime
button
- (~)
-
+
AC voltage power supply
Ausgangsstrom min. 150 mA
- (~)
-
+
AC voltage power supply
Ausgangsstrom min. 150 mA
13