Agilent U1731C Schnellstartanleitung Seite 5

Performing LCR Measurements
Auto Identification (Ai)
Press the
appropriate primary measurement function (L, C, or R), second-
ary measurement function (D, Q, or
(parallel or series) for the device-under-test.
The LCR meter powers up in the Ai mode by default.
NO TE
shown on the left of the display screen when the Ai mode is
enabled.
•
ment function and mode.
• Press
LCR measurement steps
1
>
Freq.
OR
>
Freq. ZLCR
P
U1731C/U1732C/U1733C Quick Start Guide
U1731C/U1732C/U1733C Handheld LCR Meter
button to automatically identify and select an
flashes when the LCR meter is identifying a measure-
again while
3
S
Performing LCR Measurements
θ
), and measurement mode
is shown to exit the Ai mode.
Device-Under-Test
2
(DUT)
OR
is
Surface Mount
Device (SMD)
SMD Tweezer
5