Control Panel - HP Deskjet 2050 All-in-One J510-Serie Bedienungsanleitung

Control panel

Label Icon
1
2
3
4
5
!
6
Name and Description
On: Turns the product on or off. When the product is off, a minimal amount of power is still
used. To completely remove power, turn off the product and then unplug the power cord.
Cancel: Stops the current operation.
Start Copy Black: Starts a black-and-white copy job. Increase the number of copies (up
to 10) by pressing the button multiple times. Acts as a resume button after resolving print
problems.
Start Copy Color: Starts a color copy job. Increase the number of copies (up to 10) by
pressing the button multiple times. Acts as a resume button after resolving print problems.
Attention light: Indicates that there is a paper jam, the printer is out of paper, or some event
that requires your attention. If the attention light and both cartridge lights blink when you set
up the printer, the cartridge carriage might be obstructed. Open cartridge door and make
sure that cardboard and blue tape have been removed from inside the printer. Then press
Start Copy Black or Start Copy Color to resume.
Cartridge light: Indicates low ink or a print cartridge problem.
• If a cartridge is low on ink, replace the cartridge when print quality is no longer
acceptable.
• If a cartridge light blinks after you install a cartridge, make sure that the pink tape has
been removed from the cartridge.
!