Programming Double Or Treble Quantity Pad; Program Lock - Panasonic NE-2156-2 Bedienungsanleitung

D. PROGRAMMING DOUBLE OR TREBLE QUANTITY PAD
THE OVEN CAN NOT BE PROGRAMMED WHEN PROGRAM LOCK IS ACTIVATED! (see page 9-10)
DO NOT OPEN THE DOOR WHILE PROGRAMMING!
Example: To program 1.5 times of heating time for double quantity into Number/Memory pad "5"
PAD
1
Keep the door closed.
Digital Display Window must be blank.
2
Press Prog pad.
"PROG" will start to blink.
3
Press Number/Memory pad "5".
5 The selected pad number will appear and currently programmed
information will be indicated.
4
Press Double Quantity pad.
x
2
The currently programmed magnification number will appear.
Note: 1.6 times is preset at factory.
5
Press Number/Memory pads "1" and "5".
1 5
The programmed magnification number will appear.
6
Press Prog pad.
"PROG" will stop blinking.
This means that you have completed programming.
• Three seconds later, Digital Display Window will go blank.
Note:
• If you want to program your desired magnification number for treble quantity, repeat as above, using Treble
Quantity pad instead of Double Quantity pad.
E. PROGRAM LOCK
To Activate Program Lock:
PAD
1
Keep the door closed.
Digital Display Window must be blank.
2
Press Prog pad until "PROG", "P" and "L" appear. (more than five
seconds)
"PROG", "P" and "L" will appear.
In Program Lock mode:
• The oven is started by pressing the desired Number/Memory pad. There is no need to press Start pad.
• Opening the door cancels the remaining time on the program.
• The oven can not be programmed or run manually until the program lock is released.
How to Operate
INSTRUCTION
INSTRUCTION
NE-2156-2/NE-1656
- 9 -
DIGITAL DISPLAY WINDOW
PROG
PROG
1
PROG
PROG
PROG
DIGITAL DISPLAY WINDOW
PROG