Installation; Initial Operation; Charging The Integrated Rechargeable Battery; Switching The Hands-Free Set On/Off - Conrad BT-FSE Omega Bedienungsanleitung

Installation

Attach the supplied attachment clip to the .sun-shade in your car. Now use the "mag-
nets" (7) to attach the hands-free set to the attachment clip.

Initial Operation

Charging the Integrated Rechargeable Battery & Charge Status Display
The hands-free set is equipped with a rechargeable lithium ion battery. Charge the
hands-free set with the supplied charger for approx. 3 hours before using it for the
first time.
To charge, please attach the supplied adapter cable to the supplied 12 V/DC on-
board power supply plug-in adapter. Then connect the on-board power supply plug-
in adapter to the vehicle's on-board power supply socket.
If the battery charge is low a battery symbol
display (2). This indicates that you need to charge the rechargeable
battery.

Switching the Hands-Free Set On/Off

The hands-free set has a fold-out control unit. The hands-free set switches on as
soon as this is folded out. The hands-free set switches off as soon as the control unit
is folded back in.
Hold the hands-free set on the sides at the edge of the "display" (2) housing and fold
out the control unit to switch on the hands-free set. At first a low beep tone is emit-
ted followed by a higher beep tone which confirms that the set is switched on, the
"Bluetooth Status LED" (3) also begins to flash.
appears in the
25