Returning A Call To The Mobile Phone During A Call; Redial - Conrad BT-FSE Omega Bedienungsanleitung

• Press the "Volume -" button (4) for two seconds. The hands-free set displays
"Writing..." then "import XXX", "Pbook OK" and finally "BLUETOOTH" is displayed.
• Now reinstate the Bluetooth connection between the hands-free set and your
mobile phone (this can be done by pressing the "multifunction" button (5) once.)
Please note that a maximum of approx. 250 contacts can be
stored in the memory of the hands-free set.
Note also that some mobile phones do not support transfers
from the SIM card. In this case simply copy the contacts to be
sent to the internal memory or memory card of you mobile
phone.
Do not press any buttons on the hands-free set during the trans-
fer of telephone book entries, as this leads to the transfer being
cancelled.

Returning a Call to the Mobile Phone During a Call

During the phone call, hold down the "multifunction" button (5) for 3 seconds.
If you wish to transfer the call from the mobile phone back to the hands-free set,
press the "multifunction" button (5) again.

Redial

You can very simply redial the number you last called.
Simply press the "multifunction" button (5) twice (not during a phone call). The
number you last dialled is redialled. The "display" (2) shows the text «Dialling«.
28