Brief Instructions - Conrad BT-FSE Omega Bedienungsanleitung

Brief Instructions

Status
Switching on the
hands-free set
Creation of connection Press the "multifunction" The "Bluetooth Status Connecting
between mobile phone button (5) once.
and hands-free set
(if initial installation is
complete).
Pairing
(initial installation)
Answering a call
Ignoring a call
Ending a Call
Operation
Fold out the control unit.
• Activate Bluetooth on
• your mobile phone.
• Switch on hands-free
• set
• The hands-free set is
• found - name "HF009". LED" (3) is lit
• Enter the PIN "8888".
As soon as the hands-
free set rings, press the
"multifunction" button
(5) once.
As soon as the hands-
free set rings, press the
"multifunction"
button (5) twice.
Press the "multifunction"
button (5) once during
a call.
LED Indicator &
Signal Tones
A low beep tone is
emitted followed by a
higher beep tone.
LED" (3) flashes once > BLUETOOTH >
a second. The
"Bluetooth Status
LED" (3) is lit
continuously if the
connection is
successful.
The "Bluetooth Status Mobile phone name
LED" (3) flashes
every 5 seconds if it
is in pairing mode.
The "Bluetooth Status
continuously if the
connection is
successful.
Shown on
"display" (2)
HF009 > Bluetooth
the display shows a
handset symbol and
a Bluetooth symbol.
> Connecting >
BLUETOOTH
Telephone number of
the caller > Active
Call
BLUETOOTH
BLUETOOTH
31