Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
Never touch the glass ball, when your hands are wet or damp. This may cre-
ate electrical discharges outside of the globe to a distance of several mil-
limetres. This may cause severe burns or a fire.
Never touch the glass globe with metal or conductive objects.
Never leave your hands on the glass globe for a long time, as this might cause
burns on your skin.
Never operate the plasma lamp if the glass globe is damaged.
The plasma light may be operated in the continuous mode or with the inbuilt music control.
Continuous operation
In the continuous mode the flashes appear non-stop.
To start the continuous mode, move the "ON/OFF/AUDIO" switch to the position "ON".
Operation via music control
When operated via music control, the flashes are triggered by a built-in microphone, in time with
the surrounding soundscape.
To activate operation via music control, move the "ON/OFF/AUDIO" switch to the position
"AUDIO".
Switching off the Plasma Lamp
To switch off the plasma light, move the "ON/OFF/AUDIO" switch to the position "OFF".
Maintenance and Cleaning
Never touch the glass ball, when your hands are wet or damp. This may cre-
ate electrical discharges outside of the globe to a distance of several mil-
limetres. This may cause severe burns or a fire.
Never touch the glass globe with metal or conductive objects.
Never leave your hands on the glass globe for a long time, as this might cause
burns on your skin.
Always turn off the plasma lamp before cleaning and disconnect the power
supply unit from the plasma lamp.
The plasma lamp requires no maintenance.
To clean the outside of the plasma lamp, it is sufficient to use a dry, soft and clean cloth.
Clean the glass globe very carefully, otherwise you may scratch it. Never use aggressive clean-
ing agents.
Disposal
Electrical and electronic products do not belong in the household waste!
Please dispose of the device when it is no longer of use, according to the current
statutory requirements.
Technical Data
Plasma lamp:
Operating voltage:
Dimensions:
Weight:
Power adapter:
Input:
Output:
8V/DC
approx. 150 x 150 x 250 mm
approx. 410 grams
230 V/AC 50 Hz
8 V/DC 400 mA
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or
the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in
technology and equipment reserved.
© Copyright 2009 by Conrad Electronic SE.
Werbung
Inhaltsverzeichnis
