Remote Control Battery Replacement; Maintenance And Cleaning - Renkforce 91 56 05 Bedienungsanleitung

13. Remote control battery replacement

If the range of the provided remote control is reduced, the battery (type: CR2025, 3
V/DC) has to be replaced.
To properly replace the battery, proceed as follows:
• Pull out the battery holder from the
remote control as illustrated on the
right.
• Remove the used battery.
• Insert a new type CR2025 (3 V/DC)
battery into the battery compartment
with the correct polarity.
• Carefully slide the battery holder back
into the remote control.

14. Maintenance and cleaning

Before cleaning the outside of the sound system, turn off the sound system and dis-
connect the wall power supply from the sound system.
A clean, dry and soft cloth is sufficient to clean the outside of the sound system and
the remote control.
Clean the surface very carefully, you may otherwise scratch it. Do not use any
scouring agents.
This product does not have any serviceable parts.
37